We simplify the monitoring

List of Products

Product icon 02

AVQ200 - RF Signal Inspector

ActiveCore® RF Signal Inspector with Transport Stream output

AVQ200 is an universal SFN/Off-air monitoring, can be licensed for TS output.

Supported Standards:

  • ATSC 1.0
  • ATSC 3.0
  • DAB/DAB+
  • ISDB-T/Tb
Product icon

AVQ1020 - RF Layer Monitoring Rx

ActiveCore® RF Layer Monitoring Receiver

An easy-to-use and cost-effective solution for remote monitoring digital transmitter system performance.

Supported Standards:

  • ATSC 1.0
  • ATSC 3.0
  • DAB/DAB+
  • ISDB-T/Tb

Product icon 03

AVQ1022 - RF Signal Analyzer

ActiveCore® RF Signal Analyzer and Monitoring Receiver

Remote RF layer monitoring receiver with a universal RF signal analytical device.

Supported Standards:

  • ATSC 1.0
  • ATSC 3.0
  • DAB/DAB+
  • ISDB-T/Tb


Product icon 02

AVQ1022M - RF Signal Analyzer (mobile)

ActiveCore® RF Signal Analyzer and Monitoring Receiver

Remote RF layer monitoring receiver with a universal RF signal analytical device.

Supported Standards:

  • ATSC 1.0
  • ATSC 3.0
  • DAB/DAB+
  • ISDB-T/Tb


Product of the yers 2023 nab
Product icon

AVQ1030 - ATSC 3.0 MIMO Rx and Analyzer

ActiveCore® ATSC 3.0 MIMO Receiver
and Analyzer

Real-time demodulation and payload reassembling from two ATSC 3.0 cross-polarized 2x2 MIMO RF signals.

Supported Standards:

  • ATSC 3.0
Product icon

AVQ1040 - ATSC 3.0 STLTP Analyzer

ActiveCore® ATSC 3.0 STLTP Analyzer

A powerful solution for Scheduler/Studio to Transmitter Link troubleshooting, analysis, monitoring, and verification.

Supported Standards:

  • ATSC 3.0
Product icon

AVQ1050 - ATSC 3.0 BPS Rx & Synchronizer

AVQ1050 – ATSC 3.0 BPS Receiver and Synchronizer is an essential hardware in enabling Broadcast Positioning System (BPS) operation. AVQ1050 represents a 3U device supporting two distinct modes – a BPS Synchronizer and a BPS Receiver.

What clients say about us?

Testimonials

Case Studies

Recent Projects

ATSC 3.0 RF Signal Analyzer Performance Test
The key objective of the testing procedure was to determine the Avateq's signal analyzer family performance and its degradation caused by possible hardware and DSP imperfections. The obtained experimental results were compared to theoretical limits.
ATSC 3.0 MIMO Receiver Prototype Development
The aim of the project is to develop a professional receiver and signal analyzer for ATSC 3.0 MIMO broadcast transmission.

Our Partners & Clients

USA
icon
Mexico
icon
Europe
icon
Brazil
icon
South Korea
icon
China
icon
Canada
icon
South Africa
icon
Avateq Map

1000+

More than 1000
Avateq devices in operation

20+

Serving over 20 major broadcast networks in the USA

10+

More than 10 years average lifespan of unwavering reliability

15+

More than 15 countries with products

We would love to hear about
your project